FIRESTONE AIRIDE LIFT SPACERS

Spacers for Your Lifted Applications

Spacers for Your Lifted Applications
Are lift spacers right for your vehicle?

Are lift spacers right for your vehicle?

Lift spacers can be used with most Ride-Rite™ and RED Label air spring kits but not with Coil-Rite™ air spring kits. The lift spacer needs to match the amount of actual lift added to the rear of your vehicle - a six-inch lift does not mean you need a six-inch lift spacer! Most six-inch lifts only have four inches of lift in the rear to level out the truck. This holds true for the shorter lift kits as well. Use the instructions below to determine which lift spacer fits your application. If you are unsure about the spacer needed for your application, please contact our tech line.

Learn how to measure for a lift spacer

Find a lift spacer part number

STEP 1

Identify

Find your vehicle in the kit search tool and download the manual for the specific kit. Identify the type of lower bracket installation (axle or leaf).

Step 2

STEP 2

Measure

Once the air spring and mounting brackets are properly installed, place the vehicle on all four wheels on a flat surface (under it's own weight) and measure the distance between the the upper and lower brackets.

Do's Don'ts
Step 2

STEP 3

Find

Find the corresponding lift spacer in the chart below using the lower bracket installation method and measurements determined in the previous steps.

Step 2

Lift Spacers*

DISTANCE BETWEEN BRACKETS LIFT SPACER HEIGHT AXLE MOUNT PART #** LEAF MOUNT PART #**
6.5" - 7.5" 1.25" 2536 2536
7.5" - 8.5" 2" 2366 2366
8.5" - 9.5" 3" 2368 2367
9.5" - 10.5" 4" 2371 2370
10.5" - 11.5" 5" 2373 2370
11.5" - 12.5" 6" 2375 2374



* May void Firestone warranty if incorrectly installed or wrong spacer is selected.

** Packages of 2.